1. Check whether the V-belt is slack. If there is slack, adjust it according to the manual of the fog gun machine.

2. Check whether the spray tube is broken and whether the spray tube joint gasket is damaged. If the spray tube is broken or the joint gasket is damaged, replace it.

The dust suppression fog gun machine is based on the principle of air delivery. First, the imported high-pressure pump and the fine atomizing nozzle are used to atomize the water, and then the air volume and pressure of the fan are used to send the atomized water mist to a longer distance, so that the water mist can reach farther. At the same time, the distance can cover a larger area, and the water mist and dust will fall after condensation, so as to achieve the purpose of dust reduction. At present, in many open-air stockyards and operation sites, operation dust and local dust are difficult problems in dust management. Many companies used water sprinkler measures in the past, but the small coverage area and large water consumption made the effect of water sprinkler treatment extremely unsatisfactory.