Why is there no pressure on the dust suppression and fog machine?

DATE:2021-05-27 08:36:19

Views:

ZhenTon

Instagram Email Facebook Twitter

The dust suppression mist cannon machine is to quickly attract the tap water in the water tank under the action of the three-cylinder plunger pump. When the water flow quickly reaches the water pipe, it passes through the small nozzle, and the fan sprays the water mist to a certain level. The distance so as to achieve the effect of dust reduction.
    The plunger pump is an important device of the hydraulic system. It relies on the reciprocating movement of the plunger in the cylinder to change the volume of the sealed working chamber to achieve oil suction, oil pressure, and plunger pump. It has a compact structure, high rated pressure, Advantages such as high efficiency and convenient flow adjustment. It is widely used in occasions where large flow, high pressure, and flow need to be adjusted, such as construction machinery, hydraulic presses, and ships.
    But what is going on when the fog canono machine is out of pressure? what to do? When there is no pressure on the fog machine, you can check whether the V-belt is loose. If there is any looseness, repair it according to the instruction manual of the fog machine. After checking whether the nozzle is broken, check the nozzle joint gasket. Whether there is damage, if the nozzle is broken or the joint gasket is damaged, replace one according to the manual of the fog cannon.
    How to adjust the pressure of the dust removal fog cannon? The pressure adjustment of the dust removal mist cannon is carried out from the inside. First, you must know how it works, so that you can know how to adjust, and there are specific solutions based on the principle.
    The pressure adjustment of the dust removal sprayer is realized by the pressure regulating mechanism. The specific method is when the flow meter of the plunger pump shows that the pressure cannot be reached, adjust the handwheel in a clockwise direction to adjust the compression of the spring, which will cause backflow. Reduce, and then all the water will flow directly into the pipeline for atomization spray.