When operating the fog gun machine, pay attention to the operation of the machine and protect the machine. The working environment of the fog cannon is very important. It is necessary to keep the surface of the fog cannon motor clean to ensure that the tuyere is not affected by the dust and fibers.
Fog cannons sometimes become too noisy. The reasons for this are as follows:
1. The base of the fog cannon is unstable. In this case, when the fan is working, a lot of noise is generated due to unbalance. At this time, the base needs to be fixed. Generally, the balance index can be achieved by changing the position or filling the gasket;
2. It may also be that the parts of the machine are destroyed. In this case, you need to cut off the power, turn off the machine, check the system, and replace the damaged parts;
3. If the speed is too high or the fan rotates in the wrong direction, it may also cause a lot of noise. This is an error in the construction, and it should be adjusted in time after discovery, otherwise the machine will be damaged;
4. Foreign matter enters the fan and causes noise. This situation is usually more common in construction sites or sand quarries. Because the environment in these places is relatively dusty, foreign matter should be removed in time.