The anti smog gun on a water sprinkler is an environmental device for dust suppression and cooling. It is used in dusty areas like urban roads and construction sites. Below is a 3-minute guide to its operation steps.
Park at the Working Position: Stop the water sprinkler at a safe and suitable location for spraying, ensuring the water tank is full.
Inspect the Device: Check that all connections are intact, water pipes are undamaged, joints are tight, and nozzles are clean and unclogged. Confirm key components like the water pump and anti smog gun work normally.
Activate the Water Pump: Turn on the water pump switch. Verify its normal operation by observing water flow or listening to its sound.
Adjust the Nozzle: Adjust the nozzle’s angle and position as needed to ensure mist covers the target area.
Control Spraying Parameters: Adjust mist intensity and range based on on-site conditions by modifying the anti smog gun’s spray angle and atomization level for precise control.
Conduct Spraying: Drive the water sprinkler for operation, controlling its speed and the gun’s spray range to ensure dust suppression effectiveness.

Turn Off Equipment: After spraying, first shut down the anti smog gun, then the water pump, and finally retract the nozzle and water pipes.
Park and Shut Down: Stop the sprinkler in a safe place, turn off the engine, and remove the key.
Regular Inspections: Periodically check the anti smog gun’s water pump, nozzles, water pipes, and other components to maintain good condition.
Cleaning and Maintenance: Clean the nozzles and water tank immediately after use to prevent clogging from dirt.

Note: Strictly follow the operation manual for correct use. Regularly inspect and maintain components like nozzles and the water pump. Reasonably control water pressure and spray range to avoid adverse impacts on the surrounding environment and personnel.
Proper operation ensures safe and effective use of the anti smog gun, while regular maintenance is key to its long-term reliable operation.